This kit includes the Axial Electrolytic caps in the DCC on the Board A3112 only. This kit uses the more expensive axial caps, this is required because of its tight fitting. Some values may differ, these have been updated to modern equivalent values. Comes with schematic and capacitor mapping. If you are having any issues with voltages or erratic behavior it’s recommended to change these first before tackling other issues. Some issues you might see with bad caps. Some selections not working, selections registering but other selections also being made, works perfect when powered on But after an hour it no longer selects right. Voltages wrong, this may also be voltage regulators, but recommended replacing caps first. This kit will work in many different Digital control centers, most have this same board.

There are other caps in the DCC1/2 if you plan to replace these you will need the full kit as this is just for a board A3112